Sergio Garcia de Alba Garcin from Guadalajara, Mexico
Email : firstname.lastname@example.org
A 15 watt amplifier made using discrete components. Sergio designed this circuit for his Electronics Level II course.
This amplifier uses a dual 20 Volt power supply and delivers 15 watts RMS into an 8 ohm load. Q1 operates in common emitter, the input
signal being passed to the bias chain consisting of Q8, Q9, D6, D13 and D14. Q8 and Q9 provide a constant current through the bias chain
to minimize distortion, the output stage formed by a discrete darlington pair (Q2,Q4) and (Q7,Q11). The last two transistors are power
Transitors, specifically the 2N3055 and MJ2955. The 7.02K resistor, R16 was made using a series combination of a 4.7K, 680 Ohms, and
two 820 Ohms. The 1.1K resistor, R3 was made using a 100 Ohms and a 1K resistor. You can use this circuit with any walkman or CD player
since it is designed to take a standard 500mv RMS signal.
Sergio Garcia de Alba Garcin