Electronic Canary
Circuit :  Andy Collinson
Email  :

Description
An electronic version of a chirping canary. May be used as an alarm, a sound effects generator or perhaps a replacement doorbell.

canary cct


Circuit Notes
This circuit is a modified hartley oscillator with a couple of extra components included. The transformer is a small audio transformer, type LT700. The primary is center tapped with an impedance of 1Kohms at 1KHz . The secondary has an impedance of 8 ohms. The inclusion of R1 and C1 give this oscillator its characteristic "chirp". As the 100u capacitor charges via the 4.7K resistor, R1 the bias for the transistor is cut off. This causes the oscillation to stop, the capacitor discharges through the base emitter circuit of the transistor and oscillations start again. Altering these components alters the frequency of the chirp. The chirp is also voltage dependent. When the push button switch is operated the 100u capacitor is charged. When its released, the oscillation decays and the chirp becomes faster.

Sound Sample
Click here to listen. The download size is 164kb.

Circuit Exchange International Return to Music Circuits http://www.zen22142.zen.co.uk