24 Second
Shot Clock
Circuit :Milardo
de Guzman
Email :Milardo de Guzman
Description:
This is a circuit intended to be used in basketball shot clock.
Notes:
To start in 24 seconds; 24s LOAD SW and Reset SW should be push simultaneously. If not,
the count will start in 99. Pulse input can be connected to 555 astable multivibrator but
must be calibrated for real time clock. The PAUSE SW must have a Switch Debouncer so that
the counter will count normal when counting is paused and then turn-on.
When the count reach 00, the NOR gate will have an output of logic1 that will turn on the
two transistor. The buzzer will rung and light will turn on. The two transistors are
continuously turn-on not until LOAD SW and Reset SW is push.
All have a +5v power supply.
